Juniper JN0-643 the latest exam practice questions and answers

ITCertKing's expert team use their experience and knowledge to study the examinations of past years and finally have developed the best training materials about Juniper certification JN0-643 exam. Our Juniper certification JN0-643 exam training materials are very popular among customers and this is the result ofITCertKing's expert team industrious labor. The simulation test and the answer of their research have a high quality and have 95% similarity with the true examination questions. ITCertKing is well worthful for you to rely on. If you use ITCertKing's training tool, you can 100% pass your first time to attend Juniper certification JN0-643 exam.

Never say you can not do it. This is my advice to everyone. Even if you think that you can not pass the demanding Juniper JN0-643 exam. You can find a quick and convenient training tool to help you. ITCertKing's Juniper JN0-643 exam training materials is a very good training materials. It can help you to pass the exam successfully. And its price is very reasonable, you will benefit from it. So do not say you can't. If you do not give up, the next second is hope. Quickly grab your hope, itis in the ITCertKing's Juniper JN0-643 exam training materials.

ITCertKing senior experts have developed exercises and answers about Juniper certification JN0-643 exam with their knowledge and experience, which have 95% similarity with the real exam. I believe that you will be very confident of our products. If you choose to use ITCertKing's products, ITCertKing can help you 100% pass your first time to attend Juniper certification JN0-643 exam. If you fail the exam, we will give a full refund to you.

Those who want to prepare for the IT certification exam are helpless. But they have to do it. So they have restless state of mind. However, With ITCertKing Juniper JN0-643 exam training materials, the kind of mentality will disappear. With ITCertKing's Juniper JN0-643 exam training materials, you can be brimming with confidence, and do not need to worry the exam. Of course, you can also face the exam with ease. This is not only psychological help, but more importantly, it allows you to pass the exam and to help you get a better tomorrow.

ITCertKing is a website to improve the pass rate of Juniper certification JN0-643 exam. Senior IT experts in the ITCertKing constantly developed a variety of successful programs of passing Juniper certification JN0-643 exam, so the results of their research can 100% guarantee you Juniper certification JN0-643 exam for one time. ITCertKing's training tools are very effective and many people who have passed a number of IT certification exams used the practice questions and answers provided by ITCertKing. Some of them who have passed the Juniper certification JN0-643 exam also use ITCertKing's products. Selecting ITCertKing means choosing a success

Our ITCertKing have a huge IT elite team. They will accurately and quickly provide you with Juniper certification JN0-643 exam materials and timely update Juniper JN0-643 exam certification exam practice questions and answers and binding. Besides, ITCertKing also got a high reputation in many certification industry. The the probability of passing Juniper certification JN0-643 exam is very small, but the reliability of ITCertKing can guarantee you to pass the examination of this probability.

Exam Code: JN0-643
Exam Name: Juniper (Enterprise Routing and Switching, Professional (JNCIP-ENT))
One year free update, No help, Full refund!
Total Q&A: 103 Questions and Answers
Last Update: 2013-12-19

JN0-643 Free Demo Download: http://www.itcertking.com/JN0-643_exam.html

NO.1 Click the Exhibit button.
Host 1, Host 2, and Host 3 are connected to Switch A on interface ge-0/0/2. Host 1 and Host 2 have been
authenticated through 802.1X, however Host 3 does not have an 802.1X supplicant.
Referring to the configuration in the exhibit, how can Host 3 be authenticated?
A. secure-authentication option of HTTP or HTTPS must be configured for Captive Portal.
B. MAC RADIUS authentication must be configured for Host 3 instead of Captive Portal.
C. A new authentication-profile must be configured because 802.1X and Captive Portal cannot have the
same authentication-profile.
D. The 802.1X server failback feature must be configured for Host 3 to allow non-802.1X clients to
authenticate.
Answer: B

Juniper questions   JN0-643   JN0-643   JN0-643 questions

NO.2 Click the Exhibit button.
In the exhibit, which statement about the ABR between Area 8 and Area 2 is true?
A. The router has connectivity to all areas.
B. The router has connectivity to Area 8 only.
C. The router has connectivity to Area 2 only.
D. The router has connectivity to all routers in Area 8 and Area 2.
Answer: D

Juniper exam prep   JN0-643   JN0-643   JN0-643

NO.3 Click the Exhibit button.
Referring to the output in the exhibit, why does the router prefer the path toward interface ge0/0/0.0 for the
20.0.0.0/8 route?
A. The origin is IGP.
B. The origin is unknown.
C. The AS path is longer.
D. Multihop is enabled.
Answer: A

Juniper   JN0-643 certification   JN0-643

NO.4 Click the Exhibit button.
Based on the configuration in the exhibit, why are you seeing drops in the best-effort queue on the SRX
Series platform.?
A. The drop-profile fill level is set too low.
B. Packets are dropped by a firewall policy.
C. The best-effort queue is being shaped.
D. The scheduler is not being applied correctly.
Answer: C

Juniper   JN0-643   JN0-643 questions   JN0-643

NO.5 Port authentication falls back to Captive Portal. In which two scenarios would the port
authentication move back to 802.1X? (Choose two.)
A. if any MAC RADIUS request packet is received on the interface and if there are no sessions in
authenticated/authenticating state
B. if Captive Portal is deactivated on the interface
C. if the user gets logged out
D. if the EAP packet is received on the interface and if there are no sessions in
authenticated/authenticating state
Answer: B,D

Juniper   JN0-643 original questions   JN0-643   JN0-643   JN0-643 answers real questions   JN0-643

NO.6 Click the Exhibit button.
Based on the output shown in the exhibit, which protocol is configured?
A. MSTP
B. RSTP
C. STP
D. VSTP
Answer: D

Juniper   JN0-643   JN0-643 study guide   JN0-643

NO.7 What is the default LLDP timeout?
A. 60 seconds
B. 90 seconds
C. 120 seconds
D. infinite
Answer: C

Juniper practice test   JN0-643   JN0-643   JN0-643 braindump   JN0-643   JN0-643 braindump

NO.8 A medium-sized enterprise has some devices that are 802.1X capable and some that are not. Any
device that fails authentication must be provided limited access through a VLAN called NONAUTH. How
do you provide this access?
A. Configure NONAUTH VLAN as the guest VLAN.
B. Configure NONAUTH VLAN as the server-reject VLAN.
C. Configure NONAUTH VLAN as the guest VLAN and the server-reject VLAN
D. Configure a separate VLAN for each type of user: 802.1X and non-802.1X.
Answer: C

Juniper exam prep   JN0-643 exam simulations   JN0-643 original questions   JN0-643 exam prep

NO.9 Which two LSA types are only generated by an ABR router? (Choose two.)
A. ASBR summary LSA (Type 4)
B. ASBR LSA (Type 5)
C. Summary LSA (Type 3)
D. Router LSA (Type 1)
Answer: A,C

Juniper   JN0-643   JN0-643 exam prep   JN0-643   JN0-643 exam dumps

NO.10 A user complains about connectivity problems from their IP address (10.1.1.87) to a server
(10.65.1.100).Which Junos command can help verify connectivity in the network? (Choose two.)
A. mroute
B. traceoptions
C. ping
D. clear bgp neighbor
Answer: B,C

Juniper   JN0-643   JN0-643

NO.11 Click the Exhibit button.
The exhibit shows the output of an OSPF router LSA.
Which interface ID represents the router's loopback address?
A. ID 10.1.1.0
B. ID 10.0.3.4
C. ID 10.0.3.3
D. ID 10.0.2.4
Answer: B

Juniper answers real questions   JN0-643   JN0-643   JN0-643

NO.12 Click the Exhibit button.
A user on port ge-0/0/12 fails an 802.1x authentication attempt.
What is the next action of Switch A?
A. It puts the Authenticator in the HELD status where all EAPOL packets are discarded until the default
hold timer expires.
B. It communicates with the RADIUS server to confirm the user's password.
C. It transmits an EAP-Identity-Request packet immediately after it sends out EAP-Failure.
D. It tries to authenticate the user using MAC radius authentication.
Answer: C

Juniper   JN0-643   JN0-643   JN0-643

NO.13 If your WAN-edge router is multihomed to different ISPs, which two BGP attributes would you modify to
affect outbound traffic? (Choose two.)
A. MED
B. origin
C. local preference
D. community
Answer: B,C

Juniper exam dumps   JN0-643   JN0-643 answers real questions

NO.14 Click the Exhibit button.
Based on the output shown in the exhibit, why is VSTP not working for VLAN 100?
A. No interfaces are assigned to VLAN 100.
B. Your MSTI is misconfigured.
C. RSTP is configured in addition to VSTP.
D. No native VLAN is configured.
Answer: A

Juniper   JN0-643   JN0-643   JN0-643   JN0-643 exam dumps

NO.15 When 802.1X, MAC-RADIUS, and Captive Portal are enabled on an interface, which
authentication sequence occurs?
A. The authentication sequence is based on the order of the configuration.
B. If MAC-RADIUS is rejected, Captive Portal will start. If Captive portal is timed out, 802.1X will start.
C. If 802.1X times out, then MAC-RADIUS will start. If MAC-RADIUS is timed out by the RADIUS server,
then Captive Portal will start.
D. If 802.1X times out, then MAC-RADIUS will start. If MAC-RADIUS is rejected by the RADIUS server,
then Captive Portal will start.
Answer: D

Juniper   JN0-643   JN0-643 test answers   JN0-643 original questions   JN0-643

ITCertKing offer the latest CAT-340 exam material and high-quality 70-466 pdf questions & answers. Our 642-384 VCE testing engine and 70-462 study guide can help you pass the real exam. High-quality 000-052 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.itcertking.com/JN0-643_exam.html